Brief Overview
A suspension of Magnesium Hydroxide incorporating Aloy® Technology with the additional benefit of foliar applied Sulphur.
Key Features (g/l)
MgO 365, SO3 625.
Application Recommendations
| Crop | Application Recommendations | Timings |
|---|---|---|
| Apples and Pears | 4 L/Ha | Apply after petal fall. Repeat where necessary 10 to 14 days later. In case of severe deficiency apply also before flowering (pink bud) at the same rate. Water rate 500 to 1000 L/Ha |
| Cereals | 2-4 L/Ha | Apply from the 2 leaf stage to first node detectable (Zadok’s G.S 12-31). For moderate to sever deficiency repeat the application in 10-14 day intervals. It is recommended that a further application is made of 2 L/Ha at flag leaf ligule just visible to anthesis complete (Zadok’s G.S 39-69). Water rate 200 L/ha |
| Cherries and Plums | 4 L/Ha | Apply at fruit set. Where necessary a second application at the same rate may be made 10-14 days later. Water rate 200 to 500 L/Ha |
| Conifers | 2-4 L/Ha | Apply when there is new season growth and again at the same rate in the autumn. Water rate 500 to 100 L/Ha |
| Grass / Turf | 2-4 L/Ha | Apply with spring growth. Where necessary repeat at the same rate at intervals of 14 days. Water rate 200 L/Ha |
| Pasture (Grass for grazing) | 5 L/Ha | Apply 7 to 14 days before grazing. Water rate 200 L/Ha |
| Leeks (field grown) | 2-4 L/Ha | Apply 10 to 14 days after transplanting and repeated in 10-14 day intervals where required. Water rate 200 L/Ha |
| Lettuce (field grown) | 2-4 L/Ha | Apply 14 days after transplanting and repeat in 10 to 14 day intervals where required. Final application must be made at least 1 month before harvest. Water rate 500 L/Ha |
| Maize | 2-4 L/Ha | Apply at 4-6 leaves. Water rate 200 L/ha |
| Oilseed Rape | 2-4 L/Ha | If only one application is made apply at the onset of stem extension. In case of moderate to severe deficiency apply 2-4 L/Ha at 4-6 leaves and the same again at the onset of stem extension. In severe cases an extra application at the same rate can be made 10 to 14 days later. Avoid application during flowering. Water rate 200 L/ha |
| Parsnips | 4 L/Ha | Apply when the crop is 15cm tall. In case of moderate to severe deficiency repeat at the same rate in intervals of 10 to 14 days up to a maximum of three applications. Water rate 200 L/Ha |
| Peas, Beans, Carrots, Linseed | 2-4 L/Ha | Apply when the crop is 15cm tall. In case of moderate to severe deficiency repeat at the same rate in intervals of 10 to 14 days. Water rate 200 L/Ha. NB On carrots final application to be made one month before harvest |
| Potatoes | 2-4 L/Ha | Apply one week after 100% emergence and where required during tuber bulking. In case of moderate to severe deficiency repeat at the same rate at 10-14 day intervals. Water rate 200 L/Ha |
| Raspberries | 4 L/Ha | Apply at the commencement of flowering. Water rate 200 to 500 L/Ha |
| Strawberries (field grown) | 4 L/Ha | Apply at green bud and repeat at the same rate if necessary in 10 to 14 day intervals. Water rate 200 to 500 L/Ha |
| Sugar Beet, Broccoli, Sprouts, cabbage, Cauliflower, Calabrese, Kale, Fodder beet, red Beet, swedes, Turnips | 2-4 L/Ha | Apply at 4-6 leaves. In case of moderate to severe deficiency repeat at the same rate at 10-14 day intervals Water rate 200 L/ha |
Storage
Mag S Aloy® should only be stored in its original container. The product should be stored away from direct sunlight and in frost free conditions, between 5˚C and 35˚C. Slight thickening can be a product characteristic under certain conditions. Containers should be shaken before use and rinsed thoroughly. Thickened product entering the spray tank will naturally disperse when mixed and diluted.
Instructions for Use
Read the label before use.
Always shake the bottle well before use.
NEVER MIX PESTICIDES IN THEIR CONCENTRATED FORM.
If Spray volumes are less than 200l/ha or if you are in doubt, then perform a “Jar test” on the mix before starting.
Half fill the tank with water and switch on agitation. Always make sure the additions are fully mixed until dissolved or dispersed before adding the next product.
• Add water conditioners, if needed. Add granules powders and mix well. Pre disperse if possible (WP, DG).
• Add Mag S Aloy® and other flowables (SC, SE).
• Add Emulsion Concentrates and crop oils (EC).
• Add water soluble: liquids and solids. (SL, SP).
• Add wetters, if needed and top up with water.
Provided these guidelines are followed almost all tank mixes are physically compatible, with continuous agitation. If agitation fails, for any reason, then it is essential to clean out the tank immediately.
Mag S Aloy® is tank mixable with most spray applied chemicals. Read all labels carefully and adhere to the instructions for use and advice regarding whether or not the products should be co-applied. If mixing products in the spray tank, add product first. Many variables outside the control of Safagrow can influence the performance of co-applied products and therefore co-application is entirely at the risk of the end user.
Disposal
Do not allow product to enter water courses un-diluted. Triple rinse emptied containers adding the rinsate to the spray tank. Handle empty containers and their residues as established and in accordance with local legislation and guidance.
Safety
Mag S Aloy® is a non-hazardous for transport, non flammable product and does not pose any significant health risk if used in accordance with the label and usage information. The correct Personal Protective Equipment must be worn whilst using, please refer to SDS section 7. Keep out of the reach of children. Do not store near food. Do not reuse container.
Warranty
Safagrow guarantees the content of the components as indicated on the label. The buyer assumes all risks regarding the use and management of the product.
Disclaimer
The product is compatible and can be mixed with many pesticides and nutrients but not all. However, Safagrow cannot accept any liability for any loss or damage resulting from tank mixes, as it is impossible to screen all possible mixes and conditions. Safagrow recommends the buyer tests the proposed mix on a small scale first.